E+H Proline Prosonic Flow 91W Ultrasonic Flowmeter

Model:  91W Ultrasonic Flowmeter

Device with automatic frequency scan for max. measuring
performance and cost-effective transmitter

 

Features

  • Low capital investment – cost-effectiveness increases with pipe diameter (up to DN 4000)
  • Long-term stable signal – maintenance-free permanent mounting from outside with coupling pads
  • Process transparency – diagnostic capability
  • Economical transmitter – designed for easy applications
  • Fast and reliable commissioning – Quick Setup menu for installation
  • Automatic recovery of data for servicing

 

General Specifications

  • Max. measurement error Volume flow:

              •   ±3% o.r. for DN15,

              •   ±2% o.r. for DN25 to 200

              •   ±2% o.r. above DN200

  • Measuring range 0.3 to 10 m/s (1 to 33 ft/s)
  • Medium temperature range

             •   -20 to +80°C (-4 to +176 °F)
•   0 to +130°C (-32 to +265 °F) option

  • Materials Clamp on system

             •  Sensor holder 1.4308/CF-8

             •  Sensor housing 1.4301/304 Strapping bands 1.4301/304

 

Please refer to product’s datasheet (PDF)

 

 

Sale

Huba Flow Sensor for Liquid Media – Type 210

10$

Model: Type 210

Flow Range: 0.5 to 150 l/min
Temperature Measurement: -40 to 125°C
Nominal diameters: DN 6 / 8 / 10 / 15 / 20 / 25

Please refer to product’s datasheet (PDF)

 

Sale

Huba Flow Sensor for Liquid Media – Type 230

10$

Model: Type 230

Flow Range: 1.8 to 150 l/min
Nominal diameters: DN 10 / 15 / 20 / 25
Temperature Measurement: -40 to 125°C

Please refer to product’s datasheet (PDF)

 

Sale

Huba Flow Sensor for Liquid Media – Type 236

10$

Model: Type 236

Flow Range: 1.8 to 240 l/min
Nominal diameters: DN 10 / 15 / 20 / 25 / 32
Temperature Measurement: -40 to 125°C

Please refer to product’s datasheet (PDF)

Sale

Huba Flow Sensor Type 212 For Liquid Media With Display

10$

Model: Type 212

Flow Range: 0.5 to 150 l/min
Nominal diameters: DN 6 / 8 / 10 / 15 / 20 / 25
Temperature Measurement: -20 to 85°C

Please refer to product’s datasheet (PDF)

Sale

Huba OEM Flow Sensor for Liquid Media – Type 200

10$

Model: Type 200

Flow Range: 0.5 to 150 l/min
Temperature Measurement: -40 to 125°C
Nominal diameters: DN 6 / 8 / 10 / 15 / 20 / 25

Please refer to product’s datasheet (PDF)

 

Sale

Huba OEM Flow Sensor for Liquid Media – Type 235

10$

Model: Type 235

Flow Range: 1.8 to 240 l/min
Nominal diameters: DN 10 / 15 / 20 / 25 / 32
Temperature Measurement: -40 to 125°C

Please refer to product’s datasheet (PDF)

Kanomax Model 6900, Duct Air Leakage Tester

Kanomax has developed the most advanced Duct Air Leakage Tester (DALT) for commercial duct systems. It’s designed to be simple to use, accurate, and extremely convenient. The instrument provides step-by-step duct leakage test configuration and automated leakage testing based on the SMACNA HVAC Air Duct Leakage Test Manual, and is accurate to ±2.5% of reading. Though built tough with an on-board, powerful motor, the DALT 6900 is very easy to transport on its pneumatic tires and leaves little to no footprint on the job site.

 

The instrument requires very little training due to the easy-to-follow, full color HD touch screen display through which the user can follow the step-by-step ductwork leakage testing process and select from multiple choice configuration options. The touch screen also allows the user to quickly toggle between measurement unit outputs like Fahrenheit and Celsius temperature units to m3/s, CFM, l/s, or m3/h airflow units.

 

  • Easy transport to the job with a small footprint and pneumatic tires allow for smooth movement
  • Step-by-step test configuration and automated leakage testing based on the SMACNA Test Manual Capable of both positive and negative duct leakage testings
  • Meets and/or exceeds the following standards for testing:
    • SMACNA HVAC
    • BS EN 12237:2003 EU
    • BS EN 1507:2006 EU
    • DW/143 EU
    • Eurovent 2/2 EU
    • GB50243 GB
  • Our Duct Air Leakage Tester (DALT 6900), delivers the most accurate test results in either POSITIVE or NEGATIVE setting while delivering ±10 inches of water gauge pressure in the duct.
  • Accurate to ±2.5% of READING of volume flow
  • Stores data that can be downloaded easily to a USB flash drive for report generation from the commissioning engineer to the building owner or signing authority
  • Engineered with the end-user’s perspective ensuring that it does what you need it to do and comes standard with a calibration* certificate.
  • The instrument is designed for easy transport to the job with a small footprint and fits thru roof hatches 21″x 20″
  • Order it with the optional Heavy Duty Construction Cover

 

Please refer to the product’s datasheet here. (pdf)