Pressure level transmitter 711
The level sensing pressure transmitters of type 711 with a relative pressure measuring cell have an adjusted and amplified sensor signal. Cable length from 3 to 300 meters as well as ex-versions and versions with drinking water approval are available.
FEATURES
- Ex-version available
- High accuracy
- Large variety of cable length (3 to 300m)
- Low pressure ranges
- Sea water resistant
SPECIFICATIONS
- Medium : Fluides
- Pressure range : 0…0.1 – 16 bar
- Output : 4…20 mA
- Accuracy : <0.3% fs
- Electrical connection : Cable in several lengths
Please refer to the product’s datasheet here. (pdf)
Pressure sensor 520
The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia.
Features
- Compact, rugged construction
- Welded without sealing parts, no elastomer seals
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : -1 … 9 bar / 0 … 2.5-1000 bar
- Output : 0…5V, 1…6V, 0…10V, ration. 10…90%, 4…20mA
- Accuracy : typ. <0.3% FS
- Electrical connection : Swift connector, metri pack, connector DIN 175301-803-A or C, M12x1, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Pressure sensor 522 for shipbuilding
The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded.
The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met.
All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry.
FEATURES
- Compact, rugged construction
- Welded without sealing parts
- Certified for shipbuilding with : Germanischer Lloyd; American Bureau of Shipping; Bureau Veritas; Det Norske Veritas; Lloyd’s Register
SPECIFICATIONS
- Medium : Liquids, gases and refrigerants
- Pressure range : 0 … 2.5 – 600 bar
- Output : 0 … 10V, 4 … 20mA
- Accuracy : typ. < 0.3% FS
- Electrical connection : Connector DIN 175301-803-A, M12 x 1, swift connector
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
Pressure sensor 528
The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries.
FEATURES
- Compactt, rugged construction
- Negligible temperature influence on accuracy
- Large selection of connections available
- Saving time by quick cable mounting by the customer with swift connector
SPECIFICATIONS
- Medium : Liquids and gases
- Pressure range : -1 … 0-60 bar
- Output :0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA, ratiom. 10 … 90%
- Accuracy: typ. <0.3% fs
- Electric connection : Swift connector, metri pack, M12 x 1, connector DIN 175301-803-A or C, braids, connector RAST 2.5
- Pressure connection : Inside thread or outside thread
Please refer to the product’s datasheet here. (pdf)
QuickCAL – Isotech Portable Dry Block Temperature Calibrator
Two models available:
QuickCal 550: 30° to 350°C;
QuickCal 560: -12° to 140°C
- Accuracy: 0.4°C to 0.2°C, using comparison techniques
- Wide temperature ranges: covers most critical test points
- Light 1.5kg, compact, portable and fast: nine minutes to reach temperature
- Interchangeable inserts: have one unit with multiple inserts to suit different sensor diameters
Please download product’s datasheet here. (pdf)
RFTM-LQ-CO2, ROOM HUMIDITY, TEMPERATURE AND CO2 SENSOR AERASGARD®
The maintenance-free, microprocessor-controlled AERASGARD® RFTM – LQ – CO2 – Modbus and RCO2 – Modbus/ RLQ – CO2 – Modbus with Modbus connection, with/ without optional display, in an elegant housing, plastic, with snap-on lid, base with 4-hole attachment, is used to to monitor the entire room climate. For this purpose, measurands air humidity, temperature, CO2 concentration as well as air quality (VOC) are measured. By using a single device to monitor all four measurands, it is possible to effectively monitor and regulate the entire room climate.
A digital, long-term stable sensor used as measuring element for relative air humidity and temperature guarantees exact measurement results. The air quality is determined based on a (VOC) gas mixture sensor. The CO2 content of the air is measured using an optical NDIR sensor (non-dispersive infra-red technology).
RH CAL, Portable Relative Humidity Calibrator
Model: RH CAL
A microprocessor based, programmable humidity calibration system that is at home in the metrology lab or in the field performing on-site, NIST traceable humidity calibrations.
RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable.
- Measurement Ranges:
Relative humidity: 5 to 95%
Temperature: 10°C to 50°C
Dew/Frost Point: -40°C to 60°C with D2 sensor
- Accuracy:
Relative humidity: ±0.5%
Temperature: ±0.1°C
Dew/Frost Point: ±0.2°C nominal
Please refer to product’s datasheet (PDF)
RPX Series – High Pressure/Temperature Recorders
Stiko Stainless steel chart recorders for temperature and/or pressure.
Available in three chart sizes: 6”, 9” and 12”.
- 6” chart recorder (RPX192) is widely used in gas transmission and distribution fields requiring accurate calibration and recording. Charts are 163mm.
- 9” chart recorder (RPX280) is our medium sized recorder.
- 12” chart recorder (RPX463) uses charts of 300mm.
Features
- Single, double or triple pen versions available
- Designed as portable, flush or direct mounting
- IP65
- Durable
Please download the datasheet here. (pdf)
Single Gas Detector
Model: SGC
- Unmatched sensor reliability for H2S, CO, or O2
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 85.6 x 50 x 29.2
Single Gas Detector Plus
Model: SGC Plus
- Unmatched sensor reliability for H₂S or CO
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 85.6 x 50 x 29.2
Smart-Ex® 01 – Ecom Intrinsically Safe Mobile Phone for Zone 1 / Division 1
Model: Smart Ex 01Zone 1/21 and Division 1 intrinscally safe smartphone Smart-Ex® 01 (image 1) Intrinsically Safe Smartphone: The new Smart-Ex® 01 for Zone 1 / Division 1
An ultra-rugged, unlocked, LTE / WiFi / Android™ smartphone, the Smart-Ex® 01 comes with unrivalled features:
- Such as a touch screen that can be viewed in direct sunlight and easily used with dirty or wet work gloves.
- An extremely loud speaker, noise cancellation, a powerful battery, water and drop resistance and an optional 3-Year Service Level Agreement are just some features of the Smart-Ex® 01 that provide peace of mind to enterprises and workers alike.
- Access to productivity applications and worker safety as well as a full suite of industrial-grade accessories completes the solution.
- Unlocked and SIM free – allowing connection to any network worldwide
- 9th generation of I.S. mobile phones (reliability track record)
- Quality control conducted in Germany, based on 30 years experience in the Ex-market
Please refer to product’s datasheet (PDF)
Smart-Ex® 02 Intrinsically safe smartphone for DZ1 / DZ2
Model:Smart-Ex® 02 Intrinsically safe smartphone for DZ1 & DZ2
The rugged smartphone has a large, high-resolution display, powerful features, and optimized accessories. Its extended temperature range makes it suitable for even the harshest environments.
Designed to support 21 LTE frequency bands, the Smart-Ex® 02 has no SIM lock and can be connected to different networks worldwide. An Android™ 11 operating system enables the intrinsically safe device to work safely, quickly, and efficiently.
Please refer to product’s datasheet (PDF)