• show by: 24

Ex-MP4 a, Intrinsically Safe Temperature Meter

Model: Ex-MP4 a

 

The intrinsically safe, non-contact temperature meter equipment Ex-MP4 a is a robust yet exceedingly handy and easy to use instrument for temperature measuring ex-hazardous areas.

 

Please refer to product’s datasheet (PDF)

 

Fluke 568 EX, Intrinsically Safe Infrared Thermometer

Model: Fluke 568 EX, Intrinsically Safe Infrared Thermometer

 

The Fluke 568 Ex Intrinsically Safe Infrared Thermometer is certified by major rating bodies for use in Class I Div. 1 and Div. 2 or Zone 1 and 2 hazardous environments anywhere in the world. Whether you work in petroleum, chemical, oil and gas, or pharmaceutical environments, the 568 Ex allows you to carry the most trusted name in test tools into most Ex-rated areas around the globe. The simple, three-button on-screen menu interface is quick to use and makes even complex measurements easy. It takes just a few pushes of a button to adjust emissivity, record data, or turn on and off alarms. The 50:1 distance-to-spot ratio allows you to measure smaller objects from further away. And it also is compatible with K-type probes for contact measurements. Either way, you can count on the rugged, ergonomic design to stand up to tough conditions.

 

Please refer to product’s datasheet (PDF)

 

Smart-Ex® 02 Intrinsically safe smartphone for DZ1 / DZ2

Model:Smart-Ex® 02 Intrinsically safe smartphone for DZ1 & DZ2

 

The rugged smartphone has a large, high-resolution display, powerful features, and optimized accessories. Its extended temperature range makes it suitable for even the harshest environments.

Designed to support 21 LTE frequency bands, the Smart-Ex® 02 has no SIM lock and can be connected to different networks worldwide. An Android™ 11 operating system enables the intrinsically safe device to work safely, quickly, and efficiently.

 

Please refer to product’s datasheet (PDF)

 

Tab-Ex® 03, Intrinsically safe tablet for ATEX DZ1 / DZ2

Model:Tab-Ex® 03, Intrinsically safe tablet for ATEX DZ1 / DZ2

 

The rugged, highly secure, Zone 1/21 & Division 1 & Zone 2/22 & Division 2 rated intrinsically safe Android Tablet Tab-Ex® 03 DZ1 / DZ2 continues the success story of the 3rd generation 8″ Tab-Ex® Series.

The Tab-Ex® 03 DZ1 / DZ2 comes in a slim and lightweight design with a new high-performance operating system that powers the tablet with industry leading performance in hazardous areas. The Samsung DeX function turns the compact tablet into a full desktop computer, and additional accessories, peripherals, digital products, and services ensure superior flexibility.

Despite the slim form factor the tablet ensures high performance for use in Zone 1/21 & Division 1 & Zone 2/22 and Div. 2. The multitouch display can be operated with an S Pen and with gloves, and offers optimal readability even in direct light. As a proven product for industrial and harsh environments, it stands for a long-term strategic partnership with Samsung.

 

 

Please refer to product’s datasheet (PDF)

 

WeatherLink® Console – Get In Touch With The Big Screen

The brilliant, HD touchscreen allows you to easily navigate and analyze your hyperlocal weather data or view the latest conditions from anywhere in the room. The dynamic dashboard can be customized to see at-a-glance up to 21 parameters – from temperature to wind to rain. You can set hundreds of alarms to get notified when conditions that matter to you change, such as when temperatures begin approaching a critical point for outdoor work or when wind speeds reach a certain level. With a full database of historical data stored right on the console, the console offers easy access to graphs of the last 24 hours of data, last month, or the previous year.

 

The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely. Use a free WeatherLink account to log in to all WeatherLink data viewing products and access all of your data on your phone or computer. Upgrade to Pro or Pro+ for more detailed analysis, charting, and mapping of data or to share your data with family, friends, the WeatherLink community, and beyond.

 

  • Easily navigate, view, and analyze data with the vibrant, HD color touchscreen.
  • Customize the dashboard to see at-a-glance inside and outside temperature and humidity, barometric pressure, wind speed and direction, rainfall, dewpoint, moon phase, highs and lows, and more.
  • Use the full database of historical records to create over 100 graphs for last 24 hours, days, months, or years.
  • Set hundreds of alarms to warn of dangers such as high wind, freezing temperatures, high rain rate, heat index, and more.
  • Receive and display data from your local network – no Wi-Fi required. Or use Wi-Fi to join the WeatherLink community and upload and share data.
  • Track detailed hourly and daily forecasts for the next 7 days when connected to the WeatherLink Cloud.
  • See data from up to 8 transmitting sensors or sensor suites in one location. Choose from 80+ sensors to customize your own personal weather network.
  • Protect against data loss during power outages with integrated lithium-ion battery.
  • Add a second console to your system to view data in multiple rooms.
  • Compatible with multiple smart home systems including Amazon Alexa and Google Assistant.

 

 

Sale

426Q, Fischer Thermo-Hygrograph w/ 7 days chart

10$

Model: 426Q

The thermo/hygrographs are equipped with a mechanical or quartz clockwork, the recording drum revolution cycle can be easy set from week to daily or monthly cycle (monthly cycle for quartz clockwork only), with corresponding time 25.6h/176h/783h..

 

Features

  • The carrying-handle for the ease of portability
  • Easily detachable housing simply slides out
  • Simple removal of the drum
  • Attaching recording graph paper is simple and easy
  • Sensor of the thermograph is a U-shaped bimetal of high specific deflection

 

Please download the datasheet here. (pdf)

Kestrel Portable Vane Mount

The Kestrel Portable Vane Mount is a simple yet ingenious accessory for your Kestrel 4000 series weather tracker that assembles in seconds and enables your meter to freely adjust to the wind direction.

The Vane Mount attaches easily to the Kestrel Portable Tripod (or any tripod) to add directional measurement capabilities to your Kestrel Meter.

 

Kit includes:

  • Custom molded cup bracket with incorporated level for maximum compass accuracy
  • Precision pivot with standard 1/4 – 20 tripod mount
  • Lightweight thin-wall anodized aluminum shaft and molded vane
  • Padded nylon zipper carry pouch with belt loop that holds mount and Kestrel Meter

 

Kestrel Weather Meter Tripod

Compatible with the Portable Vane Mount and any Kestrel Meter.

Available Tripod:

Kestrel Meter Collapsible Tripod

  • Stands 48.25 inches high when fully extended 51.4″)
  • Measures 13.6 inches when collapsed
  • Five section twist-and-pull legs
  • Weighs under 2 lbs
  • Compatible with the Kestrel Portable Vane Mount
  • Place of Origin: China
  • Included Clamp that mounts a Kestrel Meter
  • Included Carry case for the Tripod

Kestrel Portable Mini Tripod

  • Tripod Clamp is optional
  • Maximum Safe Load: 6 lbs
  • Measures 7.5″ to the base when standing on a flat surface
  • Pan Adjustment: 360 degrees
  • Tilt Adjustment: +/- 90 degrees
  • Angular Adjustment: +/- 20 degrees
  • Part #: With Clamp: 0799. Without Clamp: 0796
  • Dimensions (folded): 7″ x 2″ x 2″, 17.8cm x 5.1cm x 5.1cm
  • Weight: 4.2 oz., 119g

Kestrel 5500 Weather Meter

Model: Kestrel 5500

This Kestrel meter does it all! The Kestrel 5500 Weather Meter provides the same trusted accuracy, reliability, and usability as the original Kestrel 4500. Measure every environmental condition plus wind direction, crosswind and headwind/tailwind. Use it golfing, sailing, flying, spraying, shooting and more. Drop-proof, dust-proof, waterproof and able to withstand extreme environments without damage, your Kestrel weather meter travels with you anywhere you dare to go. A range of carry pouch options makes it even easier to take your Kestrel meter with you.

 

Kestrel 5500 is available in:

  • Non Bluetooth
  • W/ Bluetooth LiNK & Vane Mount
  • Tripod (sold separately)
  • Colors: Yellow, Olive Drab, Desert Tan

Features

  • Dongle
  • Bluetooth LINK to Smartphones / Mobile / Android / IOS
  • Takes 1 AA battery (instead of 2 AAA)
  • Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series<
  • Improved high resolution screen for any lighting (even sunlight) and easy on your eyes.
  • Intuitive user-interface screen navigation
  • Multiple Languages: English, French, German, Spanish
  • Scratch and breakage-resistant window
  • All meters include both options of Red (NV – Night Vision) & White backlights.
  • Slightly bigger, not really noticeable difference.  Fits same cases.
  • Includes vane mount with 5500 LiNK option
  • Roughly 12,000 data points.
  • Digital Compass
  • Wind Direction
  • Crosswind
  • Headwind / Tailwind

Environmental Measurements

  • Altitude (Barometric)
  • Barometric Pressure
  • Compass Direction
  • Crosswind
  • Density Altitude
  • Dew Point Temperature
  • Headwind/Tailwind
  • Heat Stress Index
  • Relative Humidity
  • Station Pressure (Absolute Pressure)
  • Temperature
  • Wet Bulb Temperature (Psychrometric)
  • Wind Chill
  • Wind Speed/Air Speed

 

Please download the datasheet (pdf) here.

Kestrel 2000 Wind Meter

Model: Kestrel 2000

The Kestrel 2000 Hand Held Weather Meter is a perfect companion of any outdoor enthusiast that relies on knows either wind speed, temperature, or both! Capable of measuring the air temperature, the waterproof Kestrel 2000 can also measure the temperature of water or snow. Simply dip the meter in water or snow for 30 seconds to know just how cold it is before jumping in. A hard slide-on case, lanyard, and battery are included and the Kestrel 2000’s backlight allows you to check the measurements even in the darkness.

Features

  • Temperature Sensor (Patented External Isolated)
  • Waterproof to IP67 standards (can be submerged up to 3’/1M for up to 30 minutes)
  • Backlight
  • Data hold function
  • User replaceable impeller
  • Reliable, portable and easy to use
  • Assembled in the USA
  • 5 year warranty

Environmental Measurements

  • Current Wind Speed
  • Maximum Wind Gust
  • Average Wind Speed
  • Temperature (Air, Water, & Snow)
  • Wind Chill

 

Please download the datasheet (pdf) here.

Kanomax 6501 Series, CLIMOMASTER ANEMOMETER

The most accurate handheld hot-wire anemometer of its kind.

The Climomaster anemometer is a research grade handheld hot-wire anemometer that promises level 2% m.v. accuracy, making it the most accurate hot-wire airflow meter in the world. It offers a ton of flexibility and options including 8 different probes types. These probes are all interchangeable and can be used with a single main unit without any additional calibration.

Climomaster Hot-Wire Anemometer – 6501 Series probes can measure temperature and/or humidity along with air flow. Other probes are designed for use in turbulent or high-velocity airflow and some are miniaturized for use in really tight spaces like those encountered when checking the cooling profile of a circuit board. The unit comes standard with 20,000 record storage capacity and advanced data logging capability. It can also be ordered with a pressure sensor and analog output if desired. Many additional accessories such as software, extension rods, hands-free case and special cable lengths are also available.

 

Features & Benefits

  • Its sleek, ergonomic design with anti-slip grip comes standard with a highly visible backlit display making it the handheld choice of Journeymen technicians in the field.
  • Stores up to 20,000 data points which is easily downloaded to your company computer for analysis via the USB interface.
  • The optional software allows the users to view real-time data graphically formatted on their company computer
  • For your convenience the anemometer keeps track of its own calibration cycle and reminds you when it is due for calibration*.
  • The Climomaster 6501-CE measures pressure and features an analog output.
  • Equipped with an automatic atmospheric pressure compensation function.
  • When the direction of the airflow is known, choose a unidirectional probe.
  • When the direction of the airflow is unknown or turbulent, choose an omnidirectional probe.

 

Download datasheet here (pdf).

LR-Cal LHM, Professional Handheld Indicator – for pressure, force/weight and torque

The multipurpose high accuracte handheld indicator LR-Cal LHM is not only suitable for very precise measurement of pressure, force and torque in the field, but also specially as reference instrument for calibration, verification and adjustment of pressure, force and torque reading instruments. The analog-digital converter’s resolution of 50,000 digits works with all LR-Cal reference sensors with 2mV/V signal. Via menu it is possible to set zero-point and span as well as linearisation with 5 points.

The measurement rate of up to 4,800 measurements per seconds make this handheld instrument ideal for detection of Max or Min values (PEAKs).

 

for pressure, force/weight and torque

  • With internal pressure or force sensor or without internal sensor.
  • External sensors for pressure and torque.
  • Rigid aluminium housing, portable.
  • Up to 4800 measurements per second, programmable.
  • Data logger (130,000 values).
  • USB interface.
  • PEAK function, positive and negative.
  • “First PEAK” detection, programmable.
  • Programmable filter and average functions.
  • Chargeable Li-Ion battery, incl. USB charger.
  • 15 pressure units, 9 force/weight units, 8 torque units.
  • Up to 7 external sensors, also mixed, automatic sensor recognition.
  • Possibility of linearisation and calibration of the sensor(s).
  • Optional WIRELESS data transmission.

 

Please refer to the product’s datasheet here. (pdf)

LR-Cal LCC 100, Pressure Controller- for small pressure, vacuum and differential pressure ranges

The LR-Cal LCC 100 pressure controller measures and generates pressure and vacuum and consequently it is more than a mere measuring instrument – it can also be applied as test and calibration instrument for pressure sensors, pressure swithes and pressure gauges. Thanks to internal pressure/vacuum generation no auxiliary tools are required for operation. An internal Li-Ion battery (chargeable) makes mobile operation very easy.
Parallel operation of mains and battery supply allows for maximum flexibility.

 

Typical Applications:

  • Mobile and stationary pressure standard for low pressure and vacuum
  • Mobile and stationary of all kind of pressure reading instruments
  • Mobile and stationary pressure and vacuum source for calibration purposes
  • Leak test

 

for small pressure, vacuum and differential pressure ranges

  • Pneumatic, measures pressure and vacuum
  • Generates Pressure/Vacuum -600 mbar to +1000 mbar (built-in electrical pump)
  • Pressure ranges to 1 mbar, 10 mbar, 100 mbar and 1000 mbar, incl. factory calibration certificate
  • Accuracy up to ±0.1% FS (+1 digit)
  • Great adjustment accuracy 0.01% FS
  • Chargeable Li-Ion battery
  • Generates pressure/vacuum by pressing a key

 

 

Please refer to the product’s datasheet here. (pdf)

LR-Cal LDM 70-K50, Digital Reference Pressure Gauge

The display is continously rotatable so that a clear readability is garanteed even in unusual installation positions. The LR-Cal LDM 70-K50 can be operated menu-driven via three push-buttons. Besides showing information about the nominal pressure range as well as minimal and maximal pressure of the process, several pressure units (psi, bar, mbar, mWC, inHg, cmHg, mmHg, kPa, MPa) and the position of the decimal point can be set. The instruments zero and span can be calibrated, and the LR-Cal LDM 70-K50 can be set to factory default values via menu.

 

Features of the digital test pressure gauge LR-Cal LDM 70-K50:

  • compact, rotatable housing (DS 70 mm)
  • Battery powered
  • Accuracy ±0.25% BFSL (equal to ±0.5% FS as per IEC 60770)
  • 4.5 digit LC diisplay (digit height 11 mm)
  • 6 digit additional display to sho the selected pressure unit (height 7.5 mm)
  • Pressure units selectable: psi, bar/mbar, mWs, inHg, cmHg/mmHg, kPa/MPa
  • Easy configuration via three push-buttons
  • Ingress protection IP 65
  • Ranges from 0…0.4 bar to 0…600 bar plus compound ranges and absolute pressure ranges
  • MIN and MAX value memory

 

 

Please refer to the product’s datasheet here. (pdf)

LR-Cal LDM 80, Digital Reference Pressure Gauge Data Logger

The digital reference test pressure gauge and data logger LR-Cal LDM 80 is featured with an outstanding longterm stability. It is perfect for reference pressure measurements, for testing and calibration purposes.

This instrument is not only just measuring the applied pressure, but also the medium temperature. The data logger function stores up to 60,000 values (60,000 pressure values or 30,000 pressure values plus 30,000 temperature values). The operator can select out of 10 different common pressure units, the display resolution is programmable, as well as a digital filter (for stabilisation of fluctuating pressure values). This makes the pressure calibrator and data logger LR-Cal LDM 80 ideal for any test and calibration tasks.

 

The pressure calibrator and data logger LR-Cal LDM 80 offers

  • Accurate pressure measurement from 0…100 mbar to 0…3000 bar
  • Accuracy ±0.2% FS or ±0.1% FS
  • Analogue bargraph display
  • Temperature measurement
  • Data logging up to 60,000 values
  • USB interface
  • Lithium-Ion chargeable battery incl. charger
  • 10 different pressure units, selectable
  • Programmable digital filter
  • Zeroing by simple key press (ZERO function)
  • Min.- and Max. values storage (PEAK functions)
  • OPTIONAL: WIRELES data transmission
  • OPTIONAL: Pressure switch test functionality

 

 

Please refer to the product’s datasheet here. (pdf)

LR-Cal TLDMM 2.0, Precision Digital Reference Pressure Gauge

The digital reference pressure gauge LR-Cal TLDMM 2.0 is featured with an outstanding long term stability. It is perfect for reference pressure measurements, for testing and calibration purposes. Together with the LR-Cal portable pressure test pumps it can be used mobile, on site. For higher pressure values we recommend our LR-Cal pressure comparison pumps.

 

The digital reference pressure gauge LR-Cal TLDMM 2.0 features:

  • Accuracy ±0.05% FS incl. ACCREDIA certificate (similar to DAkkS)
    (Ranges >2000 bar ±0.1% FS incl. factory certificate of calibration)
  • Operated with chargeable Li-Ion battery (incl. charger)
  • Pressure units, settable: bar, mbar, psi, MPa, kPa, kg/cm², mHg, mmHg, mmH2O, mH2O
  • MIN and MAX Peak values
  • Programmable digital filter
  • Pressure port: 1/2″ BSP male, in stainless steel
  • Measures and indicates medium temperature
  • Large, well visible LCD, with analogue bargraph indication of pressure, backlight
  • Incl. USB interface
  • OPTION: Version with Data Logger functionality
  • OPTION: Version for panel mounting (back connection)
  • OPTION: Version without battery, for external supply 12…24 VDC

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 6900, Duct Air Leakage Tester

Kanomax has developed the most advanced Duct Air Leakage Tester (DALT) for commercial duct systems. It’s designed to be simple to use, accurate, and extremely convenient. The instrument provides step-by-step duct leakage test configuration and automated leakage testing based on the SMACNA HVAC Air Duct Leakage Test Manual, and is accurate to ±2.5% of reading. Though built tough with an on-board, powerful motor, the DALT 6900 is very easy to transport on its pneumatic tires and leaves little to no footprint on the job site.

 

The instrument requires very little training due to the easy-to-follow, full color HD touch screen display through which the user can follow the step-by-step ductwork leakage testing process and select from multiple choice configuration options. The touch screen also allows the user to quickly toggle between measurement unit outputs like Fahrenheit and Celsius temperature units to m3/s, CFM, l/s, or m3/h airflow units.

 

  • Easy transport to the job with a small footprint and pneumatic tires allow for smooth movement
  • Step-by-step test configuration and automated leakage testing based on the SMACNA Test Manual Capable of both positive and negative duct leakage testings
  • Meets and/or exceeds the following standards for testing:
    • SMACNA HVAC
    • BS EN 12237:2003 EU
    • BS EN 1507:2006 EU
    • DW/143 EU
    • Eurovent 2/2 EU
    • GB50243 GB
  • Our Duct Air Leakage Tester (DALT 6900), delivers the most accurate test results in either POSITIVE or NEGATIVE setting while delivering ±10 inches of water gauge pressure in the duct.
  • Accurate to ±2.5% of READING of volume flow
  • Stores data that can be downloaded easily to a USB flash drive for report generation from the commissioning engineer to the building owner or signing authority
  • Engineered with the end-user’s perspective ensuring that it does what you need it to do and comes standard with a calibration* certificate.
  • The instrument is designed for easy transport to the job with a small footprint and fits thru roof hatches 21″x 20″
  • Order it with the optional Heavy Duty Construction Cover

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 3905 / 3910, Portable Particle Counters

Kanomax Portable Particle Counters – Models 3905 and 3910 are the smallest 6-channel portable particle counters in the industry. They measure particles at 1.0 CFM (28.3 LPM) and 1.77 CFM (50 LPM), respectively. Both models feature 0.3-micron minimum sensitivity, large color touch screens with a streamlined and user-friendly interface programmed with different standards to help guide users through the measuring and certification process.

 

An optional Climomaster hot-wire environmental sensor is available. It provides the ability to measure air velocity, temperature and humidity, making the 3900 Series Portable Particle Counters the ultimate tools for cleanroom certification

Beyond their power and diversity as measuring tools, they are also extremely lightweight, small and incredibly easy to transport. They are fully compliant with ISA 21501-4 calibration standards and they enable you to certify cleanrooms up to ISO Class 2. Again, the multi-standard modes simplify cleanroom certifications based on ISO 14644, FS 209E, BS 5295 and EC GMP, which make the measuring process simple and offer you peace of mind when measuring for specific results.

 

There is a built-in printer and onboard data logging memory that stores up to 10,000 records at a time. The lightweight enclosure is stainless steel and absolutely cleanroom friendly, and the diverse offering of options (including the differential pressure sensor and optional second Li-Ion battery for extended operating time) truly make these portable particle counters the most powerful cleanroom measuring instruments on the market.

 

  • 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0µm, 10.0µm
  • 28.3 lpm (1.0 cfm) or 50 lpm (1.77 cfm) flow rate speeds the sampling process
  • Simultaneously measures and displays up to 6 particle sizes from 0.3 to 10 microns
  • Fully compliant with ISO 21501-4 calibration standard
  • Enables you to certify cleanrooms up to ISO Class 2
  • 50LPM and 1 CFM flow rate respectively and a 0.3micron sensitivity.
  • Upload from blueprint your cleanroom layout
  • Optional CLIMOMASTER environmental sensor provides the ability to measure air velocity, temperature and humidity making these instruments the ultimate tools for cleanroom certification.
  • Intuitive ICON-driven screens and menus are easy to learn and simple to use
  • NIST TRACEABLE CALIBRATION Certificate* comes standard
  • 3910/3905 can store up to 10,000 records of particle count data from up to 6 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports.
  • All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or Building Automation System.
  • Secure data transfer to a USB Flash Drive
  • 21 CFR Part 11 compliant with IQ/OQ documentation available
  • Built-in printer and onboard datalogging (up to 10,000 records) is standard on both 3910 /3905
  • Flexible communication with these instruments is made possible by the integrated Ethernet, RS-485, USB and Flash Drive memory card interfaces

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 3888 / 3889, Handheld Particle Counters

Kanomax’s innovative Handheld Particle Counters (Models 3888 & 3889) set the standard of instrumentation in cleanroom / operating room monitoring and verification, filter testing, IAQ investigation, data center cleaning and many more highly specialized and highly sensitive applications. These beautifully engineered devices boast some of the most highly advanced technology in the industry. A combination of accuracy and practicality, these devices count airborne particles with high quality performance.

 

Since their inception, Kanomax particle counters have been the trusted choice in measuring instruments of by an ever-growing group of leaders in pharmaceutical, semiconductor, food and beverage industries. The 3888 and 3889 models perform with the same reliability and accuracy as their predecessors, but now have features that make them easier to use and that can gather measurements significantly faster. They have very large, full color 4.3 inch LCD touchscreens, which can actually display data graphically for speedy interpretation. Despite the fact that measurements can very easily be taken directly from the instrument, these new models also include the easiest options for transferring data to PCs and other devices. There is an onboard USB input, which will accept a USB drive and download any number of the possible 10,000 data logs and transferred into a Windows 10 application.

The Kanomax Handheld Particle Counters meet ISO 21501-4 Standard and are fully RoHS compliant.

 

  • Model 3888 displays 3 particle sizes simultaneously (0.3, 0.5, 5.0μm) in cf or m3
  • Model 3889 displays 6 particle sizes simultaneously (0.3, 0.5, 1.0, 3.0, 5.0, 10.0μm) in cf or m3
  • Large, 4.3-inch full-color touchscreen
  • 0.3 micron minimum sensitivity
  • Store up to 10,000 measurements
  • Compact and Light weight
  • Remote control software
  • Easy to read and interpret data due to large screen with full color and graphic display
  • Storage capacity for up to a week’s worth of data
  • Compliant with current ISO-14644
  • Ergonomic and comfortable for long periods of use
  • Grants the ability to control and monitor the instrument remotely through a PC
  • Easy data transfer to USB drive
  • Compliant with current ISO 21501-4 calibration standard

 

Please refer to the product’s datasheet here. (pdf)

Kanomax Model 6715, TABMASTER AIRFLOW CAPTURE HOOD

The Kanomax TABmaster Airflow Capture Hood is an extremely lightweight and easy to handle balometer, and it’s perfect for your next HVAC test. It is equipped with professional-grade features that make this flow hood both versatile and accurate, as it simultaneously measures airflow, temperature and humidity. This unique balometer features bluetooth connectivity allowing integration with two mobile apps, Kanomax TAB Viewer and Building Start’s AirNAB (see Resources > Software and Programs), for easy data-recording and remote control. It’s the only tool you need for all your supply and return airflow measurements.

The Model 6715 is equipped with a removable, handheld micromanometer with Bluetooth® wireless capability, which stores up to 8,000 measurements. The micromanometer also has tilting capability, which allows for easy reading of the measurements while utilizing the extremely convenient, portable flow hood stand with a wheeled base.  A single operator can run a full HVAC test without ever stepping on a ladder or recruiting a helper! The TABmaster™ is available in six different hood sizes to ensure that the transparent flow hood will fit your duct size perfectly! Pressure testing, gathering face velocity readings and in-duct airflow measurements are no longer a hassle for HVAC professionals with the TABmaster™ Model 6715.

 

  • 23 to 2500 CFM (40 to 4250 m3/h) range
  • Removable handheld micromanometer with Bluetooth wireless capability.
  • Simultaneously measures and displays air flow, temperature and humidity
  • Displays the direction of the airflow as well as the velocity
  • Store up to 8,000 measurements
  • Advanced storage feature allows you to store multiple measurements under a single ID number
  • Two available apps: Kanomax TAB Viewer (for Android/iOS) and Building Start AirNAB (for iOS)
  • This is the perfect tool for accurate supply and return airflow measurements
  • Our optional interchangeable hoods make it a snap to sample the air for any duct size
  • The unit is lightweight and easy to handle
  • Simultaneously measures and displays air flow, temperature and humidity
  • Features a removable handheld micromanometer
  • A multifunctional instrument that measures airflow and pressure readings
  • Take control of your Flow Hood remotely with our TAB VIEWER APP (Android)
  • Bluetooth™ wireless function is standard
  • Air volumetric flow measurements through registers, diffusers and grilles
  • Displays Air velocity direction and measurement in full color for clear easy viewing
  • HERS (Home Energy Rating System) approved testing instrument

 

Please refer to the product’s datasheet here. (pdf)

Model 6710, TABMASTER Airflow Capture Hood

Whether you need to test a newly installed HVAC system for initial functionality, re-test a building’s HVAC after it undergoes significant constructional changes, or regular seasonal change check-ups, the TABmaster Flow Hood Model 6710 needs to be in your equipment arsenal.

The unit has some defining characteristics that put it into the running for best choice among professionals who actually operate TAB instruments in the field on a day-to-day basis.

 

  • 23 to 2500 CFM (40 to 4250 m3/h) range
  • Simultaneously measures and displays air flow, temperature and humidity
  • Displays the direction of the airflow as well as the velocity
  • Store up to 3,000 measurements
  • Advanced storage feature allows you to store multiple measurements under a single ID number
  • This is the perfect tool for accurate supply and return airflow measurements
  • Our optional interchangeable hoods make it a snap to sample the air for any duct size
  • The unit is lightweight and easy to handle
  • Simultaneously measures and displays air flow, temperature and humidity
  • Motorized tilt on meter to allow for meter angle adjustment
  • A multi-functional instrument that measures airflow and pressure readings
  • Air volumetric flow measurements through registers, diffusers and grilles
  • Displays Air velocity direction and measurement in full color for clear, easy viewing
  • HERS (Home Energy Rating System) approved testing instrument

 

Please refer to the product’s datasheet here. (pdf)

Vaisala Indigo Family

Discover the modular Indigo

The Vaisala Indigo family is a customizable instrument platform designed to improve process measurements. The Indigo family’s key feature is modularity. It contains a selection of transmitters, interchangeable smart probes that measure various parameters, and software for easy interfacing and monitoring of data. Choose any probe and connect it with any of the transmitters, or integrate the probes into other systems. The Indigo platform is built on top of Vaisala’s self-produced, core sensor technologies.

Whether you measure humidity, temperature, dew point, moisture in oil, carbon dioxide, barometric pressure, or vaporized hydrogen peroxide, the accuracy and long-term stability of Indigo-compatible probes are in the class of their own. The probes deliver repeatable measurement with high resolution, providing you with data that you can rely on, which helps you to make better decisions – over the long term.

 

Indigo transmitters

Vaisala Indigo transmitters offer many features that complement Indigocompatible smart probes. They enable real-time data visualization and access to probe configurations. They also offer additional connectivity, supply voltage, and wiring options compared to using a stand-alone smart probe.

  • Indigo500 series – a robust transmitter with features including dual probe support, power over Ethernet, a robust metal enclosure, and touchscreen display.
  • Indigo200 series – a transmitter with single probe support, analog, digital, and relay outputs, a modern graphical or numeric display, and wireless access via a nearby smartphone or PC.

Available Probe

  • Humidity and temperature probes
    • HMP1 for ambient measurement in indoor spaces and wall-mounting
    • HMP3 for general-purpose use and duct mounting
    • HMP4 for high-pressure or vacuum environments
    • HMP5 for high temperature environments
    • HMP7 for high-temperature and/or condensing environments
    • HMP8 for high-pressure or leak-tight installation
    • HMP9 for rapidly changing environments
    • TMP1 for demanding temperature measurement
  • Dew Point Probes
    • DMP5 for high temperatures <180 °C (356 °F)
    • DMP6 for very high temperatures <350 °C (660 °F)
    • DMP7 for leak-tight installation <10 bar
    • DMP8 for high-pressure or leak-tight installation <40 bar
  • Moisture in Oil Probes
    • Indigo compatible probe MMP8 incorporates the Vaisala HUMICAP 180L2 sensor, which is optimized for moisture in oil applications. The probe is suitable for demanding moisture measurement in a range of oils such as transformer, hydraulic, and lubrication oils and includes a CIGRE recommended traceable calibration certificate.
  • Carbon dioxide (CO2) probes
    • GMP251 for %-level measurements (0–20 %CO2)
    • GMP252 for ppm-level measurements (0–10,000 ppmCO2)
  • Vaporized hydrogen peroxide (H2O2) probes
    • HPP271 for measuring H2O2 vapor concentration
    • HPP272 for measuring H2O2 vapor concentration, relative saturation, humidity, and temperature
  • Barometric pressure measurement
    • The Indigo520 transmitter with the barometric pressure measurement module combined with one or two of the Indigo compatible humidity
      and temperature measurement probes is a unique combination of a meteorological-grade barometer in a single industrial device. Measure
      three parameters simultaneously: barometric pressure, humidity and temperature.

 

Please download the datasheet here (pdf).

Medusa 510 / 511, Temperature Calibrator

Large Volume Temperature Calibrators

The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designed for fast heating and finds applications in the glass, electrical power, automotive and material processing industries.

The Pegasus-T is the latest member of the Pegasus family developed for sensors that are simply too short to be calibrated in the Pegasus 4853 or other conventional calibration furnaces.

The advanced control system allows the user to select optimal performance for sensors immersed at 25mm, 35mm or 50mm with three independent control loops. It also has built in over-temperature protection to protect the heater wire from over temperature thus increasing life expectancy.

 

Advanced Features

Isotech have a wide range of Dry Blocks to suit probes requiring a large immersion depth. These products feature large and deep calibration volumes. As such they are less portable than the earlier Dry Blocks, but have higher capacities and retain outstanding temperature uniformity, this uniformity is so good that these larger products are also apparatus for Secondary Laboratories to realize the Fixed Points of ITS-90.

Medusa 510 has a maximum operating temperature of 550°C. The Medusa Model 511 can be used to 700°C and features three zone control. In addition to the main heating zone there are additional top and bottom heaters which compensate for the end losses creating a constant temperature zone across the well.

For Comparison Calibration the Medusa should be used with an insert, the standard insert has six 8mm pockets 250mm deep. Also available is an insert 44mm diameter x 170mm deep which is suspended from the top of the block so that the height is user adjustable. For flexibility the Medusa can also be used with accessories for infrared thermometers and surface sensors. The Medusa is available in two models, the BASIC (B) and the SITE (S). The B model includes a sophisticated temperature controller with a dual display for Set Temperature and Dry Block Temperature.

The S model includes a built-in digital thermometer to which an external standard thermometer can be connected giving greater accuracy, eliminating temperature gradient and loading errors. Also included in the site model is a timer which can set the bath between two temperatures, and automate ITS-90 fixed point operation. For Surface Sensor and Blackbody use an external thermometer is recommended. For laboratory accuracy the Medusa can be used with a high-end temperature indicator such as an Isotech TTI model.

Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature. Increased resolution of ±0.01 available throughout the range via the PC interface and from 0.01 to +99.99 locally on the auto-ranging front display. The controller features multi-point block to display correction giving good absolute accuracy.

The S model has universal sensor input allowing Platinum Resistance Thermometers, Thermocouples (types K, N, R, S, L, B, PL2, T, J and E) along with Linear Process Inputs including 4-20mA current transmitters to be displayed on the in-built indicator. The indicator can be programmed with up to five calibration points to provide high accuracy digital probe matching. The indicator and controller are both addressable over the communications link.

 

Please download the datasheet here (pdf).

BG88IAQ, IAQ Meter with CO2 & Smoke Detector with Smart Wifi Connection

Model: BG88IAQ

  • CO2 Meter & Smoke Alarm in 1 unit with an audible alarm, LED lights reminder, Real-time notification on your Smartphone & Unit whenever an alarm is triggered, allows you to temporarily silence any annoying alarms caused by kitchen fumes, smoking, etc via the app or device
  • NDIR CO2 Sensor delivers high accuracy and fast response, Photoelectric smoke alarm responds quickly with a loud 85-decibel siren sounds
  • Protects during a power failure – It operates on a power source with 1400mAh rechargeable battery backup
  • You can view up to 1 month of history reading with trend chart in APP. All alert conditions are recorded in the alarm log.
  • Simply installs the monitor on the wall where you need it, connect the device to the app, and the device is ready to use. The device is auto-calibrating every 24 hours after power on. The zero point of automatic calibration is 400ppm.

 

Features

  • Measures Temperature, Humidity, CO² and Smoke sensor (1sec rapid measurement)
  • Accurate NDIR CO² sensor
  • CO²  & Smoke alarm buzzer
  • With Wifi, real time notification through smartphone
  • Alarm memory
  • Big LCD display
  • Monitor up to 30 devices
  • Share device up to 10 persons

 

[video width="1920" height="1080" mp4="https://acezonline.com/wp-content/uploads/2022/03/BG88IAQ..mp4"][/video]

 

 

Please refer to product’s datasheet (PDF)

1 2 3 4 9 10 11