LOG32TH, Temperature & Humidity PDF-Datalogger
Temperature & Humidity logger with the integrated USB-interface.
- Automatic PDF creation and useable without software
- Approximately 60,000 measurements (temperature & humidity)
- Free adjustable recording interval 30 seconds up to 24 hours
Features
- Memory size: 60.000 measurements
- Usable without software (default settings)
(5-minutes-interval, without alarm settings) - Automatic PDF creation (no drivers required)
- Optional software download (free adjustable recording interval: 30 seconds…24 hours)
- Status- and Alarm-LEDs
- Includes wall mount
Please download the datasheet here. (pdf)
DOS 001 – Stiko Deadweight Testers
High accuracy deadweight tester with an accuracy of 0.01% of reading.
- Two 4-wire analogue output 0-5/10 V or 0/4-20 mA
- ABS housing IP 65, with or without 2-lines 19-digits LCD display, 2 relays, software or keyboard
configuration - Quick and easy mounting with the 1/4 turn system with wall-mount plate
- Configurable air velocity range from 0 to 30 m/s with hotwire probe
Please refer to product’s datasheet (PDF)
TS40P, Taishio Pneumatic Pressure Handpump
- Pressure to 40 Bar, vacuum better than 0.95 bar
- Through hand operated scissors action pump
- With 1m flexible hose with 1/4″ BSP (F) swivel adaptor for connecting the test instrument
- Combination of vacuum and pressure
Please refer to product’s datasheet (PDF)
MGF16BN – Meriam Digital Pressure Gauge (Medical)
The MGF16BN digital pressure gauge is designed to handle the demands of pressure measurement. Pressure ranges are available to 5 000 PSIG at standard accuracy of ± 0.25 % of full scale or higher accuracy of ± 0.1 % of full scale.
The display is a 4 digit LCD with 0.5″ high numerals and a lower alphanumeric display for engineering units to aid in set up. Each gauge includes up to 15 selectable engineering units depending on the sensor range. The gauge is powered by two AA alkaline batteries.
- ±0.25% Test Gauge Accuracy
- 316L Stainless Steel Wetted Parts
- NEMA 4X
- Capture Minimum and Maximum Readings
- Push Button Zero
- Selectable Engineering Units
- Selectable Auto Shutoff Times
Please refer to product’s datasheet (PDF)
TS-DPG-110, Taishio High Accuracy Digital Pressure Gauge
High-precision pressure sensor 0.2% FS accuracy
- 4-digit LCD showing the pressure reading accurately in real time
- Different pressure units to choose from, zero clearing, backlight on/off
- Display units: kPa, PSI, kg/cm2, Bar, MPa
- Battery-powered, low-power design
- High-precision pressure sensor 0.2%FS
- Overload Capacity 150%
- Operating Temperature 0 to 40°C
Please refer to product’s datasheet (PDF)
MPG 7000 Plus – MeriGauge® Plus Digital Pressure Gauge
Model: MPG 7000 Plus
The MPG7000 Plus is a digital pressure gauge with inter-changable sensors, allowing flexibility to the user, sensors contain the calibration, various types and ranges.
- 10 Interchangeable Smart Sensor Modules
- Compound gauge pressure range -14.5 to 3000 PSIG
- Ranges 15-3000 psi
- Gauge works with all meriSense sensors
- Up to 32 engineering units
- Fully configurable via meriLink™ PC Software
- Update rate, 5 measurements per second
- Standard delivery: Meriam MPG7000 Plus Digital Pressure Gauge, Sensor module 0-300 PSIG
- Intrinsically Safe, IP 66
Please refer to product’s datasheet (PDF)
Model 989, Isotech Black Body Source
Model: Black Body Source, 989
It was used to increase the accuracy of thermal imagers measuring human skin temperature in temperature screening of applications. It can also be used to check non-contact clinical thermometers. The upgraded controller can either be locked to a single temperature or it can be adjusted over a new wider temperature range of 20°C to 50°C. Model 989 also has a PC
interface fitted as standard. It allows the temperature to be both monitored and adjusted from a PC.
Please refer to product’s datasheet (PDF)
- Improves accuracy of Fever Detection Systems
- Covers 20°C to 50°C with Fast Thermal Response
- Check Non-Contact Thermometers
- The blackbody can maintain its set point in high ambient temperature conditions and it can also operate below the ambient temperature
Pegasus R, Isotech Black Body Source
Model: Pegasus R 970
High temperature blackbody source, 150°C to 1200°C with accuracy of ±0.1°C
- Portable black body calibration source for radiation pyrometers
- Laboratory performance and low certainty calibrations
- Built-in temperature indicator and included platinum resistance thermometer
- Excellent temperature uniformity
Please refer to product’s datasheet (PDF)
Gemini R – Isotech Black Body Source
Model: Gemini R 976
Medium Temperature Blackbody Source, 30°C to 550°C with accuracy of ±0.1°C
- Portable black body calibration source for non-contact thermometers ranging from 30 to 550°C
- Laboratory performance and low uncertainty calibrations
- Built-in temperature indicator and included platinum resistance thermometer
- Excellent temperature uniformity
- For the smallest of uncertainties the Gemini R may be used with Isotech ITS-90 Fixed Point Cells,
Gallium 29.7646°C, Indium 156.5985°C, Tin 231.928°C and Zinc 419.527°C
Please refer to product’s datasheet (PDF)
Hyperion R – Isotech Black Body Source
Model: Hyperion R 982
Low Temperature Blackbody Source, -10°C to 80°C with accuracy ±0.01°C.
- Portable black body calibration source for non-contact thermometers ranging from -10 to 80°C
- Suitable as primary radiation source for infrared thermometers from sub zero to 80°C
- Laboratory performance and low uncertainty calibrations
- Built-in temperature indicator and included platinum resistance thermometer
- Excellent temperature uniformity
Please refer to product’s datasheet (PDF)
MFT 4010 – Meriam Modular Calibrator with HART® Communicator
Model : MFT 4010
All-in-One tool. Takes the place of multiple handheld instruments, simplifies workload and improves productivity
- Multifunctional tester: Modular Calibrator, HART Communication, Documentation with Meriam’s DMS Database Software
- Calibration types supported: Pressure, T/C, RTD, I/P, P/I, Switch, Loop and mA/V for conventional or HART transmitter or local indicators
- Device Specific HART commands for smart Analytic, Flow, Level, Pressure, Temperature & Valve devices
- Three sensor bays for a variety of pressure, temperature and electrical measurement and simulation Sensor Modules
- Intrinsically Safe option
- Accuracy: ±0.025%FS traceable to NIST with full temperature compensation from -5 to 50°C
Modules Available
- Thermocouple Measurement and Simulation
- Pressure Module
- RTD Measurement and Simulation
- Voltage, Current & Simulate and 24V DC Isolated Loop Power
Please refer to product’s datasheet (PDF)
M2000 – Digital Smart Manometer
Model: M2000
Features NIST traceable accuracy ± 0.025 % FS with 30 selectable pressure units
- Device c/w calibration certificate traceable to
NIST - Delivers ±[(0.02% of FS) + (0.005% of Reading)]
accuracy - Measures absolute, differential & compound
- Operating Temperature: -10 °C to +50°C
- RTD (Temperature) accessory sensor option
class A PT 100 available:
– Temperature Accuracy ± 0.15 + 0.002 ltl°C
– Measurement range of -50 C° to 250°C - Leak Test function
Please refer to product’s datasheet (PDF)