MH-10KT Hydraulic Pressure Kit / Pump
Model: MH10-KT Hydraulic Calibration Pump Kit, 0 to 10,000 PSIG Range
Wide Pressure Range
- 0 – 10,000 psi (700 Bar)
- Compatible with most hydraulic fluids, oils and water
- Connections (2 ports) 1/4 inch NPT/BSP
Please refer to product’s datasheet here. (PDF)
Isotech Multifunction Temperature Calibrator Europa-Venus-Calisto 4000 Series
Model: Europa-Venus-Calisto 4000 Series-45°C to 250°C. 35 x 160mm Volume
- Multi Function: Six Modes including Dry Block and Liquid Bath
- Fast Response 35mm x 160mm Calibration Volume
- Calibrate Whole Measurement Loop
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 384 x 212 x 312
FAST-CAL, Isotech Temperature Calibrator
Model: FAST-CAL (complete set) Isotech Temperature Calibrator
- Rugged, hard-wearing stainless steel case
- Lightweight, between 6.35 and 6.60 kg depending upon the model
- Easy to use on site
- Fast response, high stability
- Multiple sensor testing
Temp. Range
– 35 to 650 deg Celsius
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 248 x 228 x 143
Hotwire Anemometer
Model: AI 961Measures air velocity in m/sec, ft/min, km/sec, knots or mph
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 185 x 66 x 33
Package Dimensions (mm): 0 x 0 x 0
Kestrel 1000 Wind Meter
Model: Kestrel 1000 Handheld Wind Meter
Simple and compact, the Kestrel 1000 Handheld Wind Meter fits right in the palm of your hand and weighs a mere 2.29 ounces (65 grams). It’s also extremely durable and completely waterproof, allowing you to measure wind speeds even in the harshest weather conditions. The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort.
Convenient and reliable, the Kestrel 1000 is the perfect tool for model plane pilots, kite boarders, and other outdoor enthusiasts who rely on accurate wind speed information. The Kestrel 1000 is the most common handheld wind instrument for a DZSO (Drop Zone Safety Officer). A hard slide-on protective case, lanyard, and lithium battery are included.
Please refer to product’s datasheet (PDF)
Kestrel 5200 Professional Environmental Meter
Model: Kestrel 5200
Whether you’re pouring concrete, balancing HVAC systems, or monitoring jobsite conditions, the Kestrel 5200 Professional Environmental Meter takes the calculations and guesswork out of your job with integrated specialty calculations. No more guessing or using inaccurate data from miles away.
The 5200’s NEW Concrete Target Evaporation Rate Solver allows user to adjust calculator for varying weather conditions and displays the risk of plastic shrinkage cracking for each scenario — enabling contractors to determine the appropriate set of precautionary steps that will result in a successful pour. The Kestrel 5200 offers advanced calculators and readings that are unique in the portable meter market and are designed to make your job easier. In addition to measuring current environmental conditions, the 5200’s new Concrete Target Evaporation Rate Solver displays the level of cracking risk based on user-defined weather conditions and shows which environmental factors may require adjustments in order to prevent plastic shrinkage cracking. With reliable real-time environmental monitoring of jobsite conditions along with accurate predictive calculations, the Kestrel 5200 Professional Environmental Meter with LiNK® Bluetooth Low Energy Technology helps concrete contractors know when to take steps to minimize the risk by adjusting the mix or utilizing protective measures.
Environmental Measurements
- Air Density
- Air Flow (CFM)
- Altitude (Barometric)
- Barometric Pressure
- Delta T
- Density Altitude
- Dew Point Temperature
- Evaporation Rate
- Heat Stress Index
- Humidity Ratio
- Relative Air Density
- Relative Humidity
- Station Pressure (Absolute Pressure)
- Temperature
- Wet Bulb Temperature (Psychrometric)
- Wind Chill
- Wind Speed/Air Speed
Please download datasheet (pdf) here.
Kestrel 5100 Racing Weather Meter
Model: kestrel 5100 Racing Weather Meter
The Kestrel 5100 Racing Weather Meter is Kestrel’s Racing pit meter for Bracket Racing and other forms of drag racing. Kestrel has been trusted for years for last minute tuning decisions. Get readings where it counts, on the track, not the trailer. With the new LINK technology, you can get readings right to your smartphone up to 100 feet away! The Kestrel 5100 Racing Weather Meter gives you immediate, on-spot measurements including moisture content in grains, air density, relative air density, humidity, and other critical factors. Count on it for the information you need to make perfect ET predictions and performance-maximizing tuning and jetting decisions.
The Kestrel 5100 upgraded from the Kestrel 4250 in November of 2015. Functionally, you’re getting the same environmental features with some overall big improvements to the meter itself.
Features and Measures
- Pressure trend
- Waterproof (sealed to IP67 standards)
- Time and date
- Easy-to-read backlit display
- Data Logger (automatic and manual)
- Customizable data storage – 2900 data points
- Minimum, Maximum and Average values
- Multi-Function 3-line display
- Exterior temperature, humidity, and pressure sensors for fast and accurate readings
- Customize screens to display user-selected measurements
- Graph and recall trends
- User-replaceable impeller
- Flip-top impeller cover allows use of other functions while protecting the impeller
- Data charting
- Upload to a computer (with optional interface) Mac or PC
- Works with Android and iPhone Apps!
- Five languages (English, French, Spanish, German, and Italian)
- Rugged (drop tested to MIL-STD-810G standards) and waterproof (sealed to IP67 standards).
- Assembled in the USA
Environmental Measurements
- Air Density
- Altitude (Barometric)
- Barometric Pressure
- Density Altitude
- Dew Point Temperature
- Heat Stress Index
- Moisture Content (Grains)
- Relative Air Density
- Relative Humidity
- Station Pressure (Absolute Pressure)
- Temperature
- Wet Bulb Temperature (Psychrometric)
- Wind Chill
- Wind Speed/Air Speed
Download the datasheet (pdf) here.
Kestrel 5000 Environmental Meter
Model: Kestrel 5000
The Kestrel 5000 Pocket Weather Meter is the baseline wind and weather meter in the Kestrel 5000 series. While the Kestrel 5000 Pocket Weather Meter is similar in wind and weather monitoring functions available with the Kestrel 3500 Wind Meter, it has several advantages such as Bluetooth connectivity, data storage, graphing functions, and computer interface technology. It has the capacity to store up to 10,000 data points of weather data, enabling you to track changes in the environment over time, view these changes as graphs on your Kestrel 5000’s display, and even upload the data to your PC or Mac. The Kestrel 5000 series is now available with optional Bluetooth LINK Technology, which allows your Kestrel to communicate with your Android or iOS device up to 100 feet away, and maximize the battery life of your weather meter.
Each Bluetooth Meter includes custom communication software designed to quickly and easily configure your data transmission frequency, download logged data, graph data, and transfer data to other applications.
As with all 5000 series Kestrel meters, they have both a white backlight (which is even great for daytime use) and a night-vision preserving backlight. The red night vision (NV) backlight incorporates an optical filter to reduce overall brightness and minimize blue and green spectrum light to preserve night vision. (Note: This backlight appears soft greyish pink, not “red”, and is still in the visible spectrum, so is not compatible with night-vision equipment.) Basically, with the red backlight, your eyes don’t need to adjust when looking from your meter to the horizon in night time use.
FEATURES:
- Waterproof
- Easy to read, backlit screen with high resolution for even bright sunny conditions.
- Time and date
- Exterior temperature, humidity, and pressure sensors for fast and accurate readings
- Minimum, maximum, and average values
- Automatically store measurements, even when the unit is turned off
- Manually store measurements with the press of a button
- Customizable data storage – 10,000 data points
- Graph and recall trends
- Customize screens to display user-selected measurements
- Data charting
- Data upload (with optional interface or Bluetooth)
- Five languages (English, French, Spanish, German, and Italian)
- User-replaceable impeller
- Flip-top impeller cover allows use of other functions while protecting the impeller
- All instruments and accessories are completely assembled in the USA
Environmental Measurements
- Altitude (Barometric)
- Barometric Pressure
- Density Altitude
- Dew Point Temperature
- Heat Stress Index
- Relative Humidity
- Station Pressure (Absolute Pressure)
- Temperature
- Wet Bulb Temperature (Psychrometric)
- Wind Chill
- Wind Speed/Air Speed
Please download the datasheet (pdf) here.
Kestrel Meter Impeller
Replacement impeller for all Kestrel Meters. User replaceable.
Impeller Replacement Instructions
Using your thumbs, press FIRMLY on the impeller module to remove the entire unit.
Press only the sides of the new impeller when installing to avoid damaging the precision hub bearing.
Insert the impeller so that the half that has the serial number label on it goes in first and faces the back of the unit once in place. Orient one “arm’ straight up (The impeller should look like a peace symbol or an upside-down Y).
My impeller is making a rattling/clicking/whirring noise, is that normal?
It is common for the Kestrel to make a rattling noise with a wind speed from 5 to 10 miles per hour. This is completely normal and accurate.
To better understand why the impeller rattles, one needs to know what is inside. Inside the plastic housing, there are four separate parts. The fan, two sapphire jewel bearings and a metal pin. The fan rotates around the metal pin which is held in the plastic housing by the jewel bearings. For the fan to move freely (to not cause excess friction) there is a small space (on either side) between the end of the metal pin and the jewel bearing. The space between the metal pin and the jewel bearing is what causes the rattle. Some impellers can be louder than others, but the accuracy will be the same.