M1000 – Meriam Digital Pressure Calibrator
Model: M1000
Single function calibrator at standard accuracy of ±0.025% FS
- Device c/w calibration certificate traceable to
NIST - Delivers ±[(0.02% of FS) + (0.005% of Reading)]
accuracy - Measures Differential, Gauge, Absolute Pressure
- 8 selectable pressure units
- Operating Temperature: -4 °C to +50°C
- Can be calibrated in the field for zero and span
- Leak testing for low pressure gas systems
- Pressure drop monitoring across filters
- Monitoring vacuum on condensers or pumps
Please refer to product’s datasheet (PDF)
MicroK, Isotech Precision Thermometry Bridge
Model: MicroK
The microK family of precision thermometry bridges use a completely new measurement technique to achieve accuracies to better than 0.02ppm.
- Supports SPRTs, IPRTs, Thermistors and Thermocouples
- High accuracy thermocouple measurements with a voltage uncertainty of <0.25μV
- Can display in °C, °F, K, ratio, resistance, voltage with numeric and graphical display
modes - Simple Touch Screen operation with easy to use interface and data logging options
- Can connect USB Memory Stick, Keyboard, Mouse
- No PC needed, the display can show temperature and resistance in addition to ratio
Please refer to product’s datasheet (PDF)
MilliK, ISOTECH Precision Thermometer
Model: MilliK
A high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to 1820°C
- Has two input channels for sensors and a third channel for current
- The milliK can control Isotech temperature sources, sequencing through
a programmable list of temperature set points and log data to internal memory or
a USB drive. - Can display in °C, °F, K, Ohms, mV and mA with numeric and graphical display modes
- High Accuracy < ±5ppm for PRTs, ±2μV for Thermocouples and ±1μA Transmitters
Please refer to product’s datasheet (PDF)
MFC5150x – Meriam Intrinsically Safe, HART Communicator
Model: MFC 5150X
Handheld calibrators and filed communicators. Available in ATEX (intrinsically safe) and Non-ATEX models, the MFC5150 directly reads Device Descriptions with Free upgrades/downloads for life the product – no subscriptions!
- The MFC5150 is built on the SDC-625 infrastructure and runs Windows CE
- With a 1 GHz processor and an 4 GB Micro SD card, this HART® communicator is ideal for all
of your data storage needs - The 4.3 inch touchscreen provides excellent anti-glare viewing, allowing for comfortable
mobile use in darkness or in bright sunlight - All functions are easily navigated via the full QWERTY keyboard and intuitive icons similar
to that of a smart phone. - Features hyperlink menu paths, teachable device specific shortcuts, instant on, multiple languages,
help context, video’s and TAB access to panes just like on a computer. - The MFC5150x is certified in the following Hazardous locations : Class I, Division I Group IIC
(US/Canada), ATEX Zone 0 Group IIC (Europe), IECex Zone 0 Group IIC (Asia, South America, Africa)
Please refer to product’s datasheet (PDF)
QuickCAL – Isotech Portable Dry Block Temperature Calibrator
Two models available:
QuickCal 550: 30° to 350°C;
QuickCal 560: -12° to 140°C
- Accuracy: 0.4°C to 0.2°C, using comparison techniques
- Wide temperature ranges: covers most critical test points
- Light 1.5kg, compact, portable and fast: nine minutes to reach temperature
- Interchangeable inserts: have one unit with multiple inserts to suit different sensor diameters
Please download product’s datasheet here. (pdf)
Hydra 798 – ISOTECH Stirred Liquid Baths
Model: Hydra 798
Liquid flows up the rear volume of the bath and down the working volume. This action creates very small vertical and axial gradients. This gives the smallest overall uncertainties.
The cooling is built-in and also surrounds the calibration volume creating a low temperature ambient in which the heater can function efficientlys. A unique cooling system cools the unit as well as enabling the bath to heat up to 125°C (121°C is a key sterilization temperature).
Three model available:
- Model: 798L (-80°C – 125°C) with ±0.030°C accuracy
- Model: 798M (-40°C – 125°C) with ±0.017°C accuracy
- Model: 798H (-30°C – 300°C) with ±0.015°C accuracy
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 405 x 610 x 940
Orion 796, ISOTECH Stirred Liquid Baths
Model: Orion 796
The Orion calibration baths oer deeper calibration volumes than the Isotech Hydra series with world class temperature stability. There is a high temperature model (30°C to 300°C) and a model with built in refrigeration (-40°C to 125°C).
These deep stirred liquid baths are suitable for the low uncertainty calibration of long thermometers including liquid in glass and extended length SPRTS.
Three model available with ±0.006°C accuracy:
- Model: 796L (-80°C – 125°C)
- Model: 796M (-40°C – 125°C)
- Model: 796H (-30°C – 300°C)
Please refer to product’s datasheet (PDF)
Product Dimensions (mm): 485 x 525 x 1150
DewMaster Chilled Mirror Hygrometer
A fast, multi-function, high precision chilled mirror hygrometer for continuously monitoring the dew/frost point temperature, parts per million water vapor by volume or percent relative humidity in gas streams.
The DewMaster is a laboratory grade, high precision, field proven instrument with multiple available sensor configurations and wide applicability to fit all budgets.
- Measurement Ranges and PPMv Ranges:
0 to 100% RH with all sensors, non-condensing conditions
0 to 999,999 PPMv with all sensors, non-condensing conditions
- Accuracy:
±0.2°C (0.36°F) dew/frost point standard
±0.1°C (0.18°F) dew/frost point optional
±0.5% of full scale pressure
- Air Temperature Sensor Range:
-100 to 250°C (-148 to 482°F)
±0.1°C accuracy
Please refer to product’s datasheet (PDF)
RH CAL, Portable Relative Humidity Calibrator
Model: RH CAL
A microprocessor based, programmable humidity calibration system that is at home in the metrology lab or in the field performing on-site, NIST traceable humidity calibrations.
RH CAL is entirely self-sufficient. It does not need compressed air or a water connection to operate, which allows this system to be truly portable.
- Measurement Ranges:
Relative humidity: 5 to 95%
Temperature: 10°C to 50°C
Dew/Frost Point: -40°C to 60°C with D2 sensor
- Accuracy:
Relative humidity: ±0.5%
Temperature: ±0.1°C
Dew/Frost Point: ±0.2°C nominal
Please refer to product’s datasheet (PDF)
TH110 – Kimo Humidity and Temperature Sensor
Kimo’s TH 110 measured humidity and temperature from 5 to 95% RH and from 0 to 50°C.
- Measuring range from 5 to 95% RH and from 0 to 50°C (ambient model) or from -20 to +80°C (duct or remote model)
- 0-10 V output or 4-20 mA output
- With or without 10-digits LCD display
- Housing with simplified mounting system
- Software or DIP switch configuration
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here.
TH210 – Kimo Humidity and Temperature Sensor
Kimo’s TH 210-R measures humidity and temperature including 0 to 100 % RH and -20 to +80°C (ambient model), -20 to +80°C (pc remote probe), and -40 to +180°C (stainless steel remote probe).
- Stainless steel or polycarbonate probe
- With or without 2-line 19-digits LCD display
- 0-5/10 V or 0/4-20 mA outputs
- Trend indicator
- Two relays
- Quick and easy mounting with the 1/4 turn system with wall-mount plate
Please download the datasheet here. (pdf)
C310 – Kimo Multifunction Sensor
Kimo’s C 310 is a multifunction sensor with interchangeable probes. It can display and measure four parameters simultaneously.
FEATURES
- Two inputs for probes
- Four visual and audible alarms
- Two analogue outputs 0-5/10 V or 0/4-20 mA
- Four RCR relays (option)
- Ethernet communication (option) and RS485 MODBUS (option)
- Adjustment certificate
Please download the datasheet here.
HM70 – Handheld Humidity and Temperature Meter
Vaisala HUMICAP® HM70 Handheld is designed for demanding humidity measurement in spot-checking applications. It is also ideal for field checking and calibration of Vaisala’s fixed humidity instruments.
The HM70 includes an MI70 indicator and an optional probe depending on the application.
- HMP75 with standard plastic grid
- HMP75B (chemical purge and sensor preheating)
- HMP76 with standard sintered bronze filter
- HMP76B (chemical purge and sensor preheating)
- HMP77 with standard plastic grid and stainless steel netting
- HMP77B (chemical purge and sensor preheating)
Please download the datasheet here. (pdf)
TS 325 – Taishio High Accuracy Temperature Head Transmitter HART®
FEATURES
• Universal Input (RTD/TC/mV/Ω)
• Universal setting with HART®-protocol
• High accuracy in total ambient temperature range: 0.02% of span for Pt100 sensor , 0.1% of span for TC sensor
• Programmable via PC-Software
• 2-wire technology, 4 to 20mA analogue output
• Galvanic isolation (2000V AC)
• Internal temperature sensor for active temperature compensation (for TC sensor)
• Fault signal on sensor break or short circuit, presetable to NAMUR NE 43
Please download the datasheet here. (pdf)
TaishioTS 323 – High Accuracy Temperature Head Transmitter
FEATURES
• Programmable temperature head transmitter
• Galvanic Isolated
• Input: RTD (PT100, PT500, PT1000
• Thermocouples B, E, J, K, N, R, S,T
• Factory Preset (PT100, 3-wire, 0 to 100°C)
• Output Signal: 4 to 20mA, 2-wire
Please download the datasheet here. (pdf)
TS307 – Taishio Outdoor Temperature and Humidity Transmitter with Shield
FEATURES
• High accuracy and long term stability
• capable of temperature compensation and linear adjustment
SPECIFICATIONS
• Temp range : 0 to 80°C
• Output 4 to 20mA
• Humidity range : 0 to 100% RH
• Dew point : -40 to 60°C
• Signal connection : 3 wires
Please download the datasheet here. (pdf)